MATEK G474-HELI Balance Flybarless Controller 2-6S LIPO for RC Helicopter
197
Direct purchase from the factory 
Oñemo'ã porãva
Jopói libre
Mba'e rembosa'irã
Mba'e devolución reheguaJopói libre
Eg̃uahẽ porã Roymall-pe, ne renda jopói porã joguápe. Rohechakuaa ha roaguyje ne pytyvõ, ha roñe'ẽ aguyje jopói libre ndive. Ejogua vove, rejoguáta mba'eporã porã ha reñemomba'e jopói libre ndive. Eheka ore apopyrã ha ejuhu ne jopói perfecto.Mba'e rembosa'irã
Rojapo tembiapo rembosa'irã 2 ára peve.Ára sapy'agua oñemboare 2 ára.Oñemboare 5-7 ára mba'apo (Lunes a Viernes).Oñemboare sapy'a tetã ambuéva rupi.1. Devolución ha cambio
Roñemoneĩ devolución Roymall-gui añoite. Jopói libre ndojejapói devolución. Ejapo devolución oimeraẽva jopói ojeipurúva'ỹre.Roñemoneĩ devolución 3-5 ára mba'apo peve.Jopói personalizado ndojejapói devolución.Eñe'ẽ ore ndive. service@roymall.com térã Whatsapp: +86193598494712.Devuelta
Reguereko devuelta oimeraẽva jopói ojeipurúva'ỹre. Mba'e rembosa'irã ndojejapói devuelta.Eñe'ẽ ore ndive. service@roymall.com térã Whatsapp: +8619359849471
Specifications:
MCU: STM32G474CE, 170MHz Cortex-M4 , 512KB Flash
IMU: ICM42688-P
Baro: SPL06
Blackbox: 128MB Flash
3x UARTs (1, 2, 3)
1x I2C
8x PWM (4x Servos, 2x Motors, RPM, LED)
2x ADC (VBAT, Current)
USB Type-C(USB2.0)
Electrical characteristics:
Input voltage range: 5.4V~30V (2~6S LiPo)
No current sensor integrated, support external 3.3V based current sensor.
Battery Voltage divider 1K:10K (Scale 110)
BEC 5V 2A for FC and peripherals
BEC Vx 5A cont. 8A Peak for servos (5V, 7.2V option)
3.3V 300mA
Firmware/config:
Rotorflight / MATEKG474HELI
Physical:
Mounting: 20 x 20mm, u03a64mm with Grommets u03a63mm
Dimensions: 38 x 26 x 13 mm
Weight: 15g (w/o pins)
3D step file
Including:
1x G474-HELI
1x PicoBlade 1.25mm Servo adapter (M2/S2 servos)
1x 20cm JST-GH-4P to JST-GH-4P cable
1x 20cm JST-GH-6P to JST-GH-6P cable
Dupont 2.54 pins (Board is shipped unsoldered)
MCU: STM32G474CE, 170MHz Cortex-M4 , 512KB Flash
IMU: ICM42688-P
Baro: SPL06
Blackbox: 128MB Flash
3x UARTs (1, 2, 3)
1x I2C
8x PWM (4x Servos, 2x Motors, RPM, LED)
2x ADC (VBAT, Current)
USB Type-C(USB2.0)
Electrical characteristics:
Input voltage range: 5.4V~30V (2~6S LiPo)
No current sensor integrated, support external 3.3V based current sensor.
Battery Voltage divider 1K:10K (Scale 110)
BEC 5V 2A for FC and peripherals
BEC Vx 5A cont. 8A Peak for servos (5V, 7.2V option)
3.3V 300mA
Firmware/config:
Rotorflight / MATEKG474HELI
Physical:
Mounting: 20 x 20mm, u03a64mm with Grommets u03a63mm
Dimensions: 38 x 26 x 13 mm
Weight: 15g (w/o pins)
3D step file
Including:
1x G474-HELI
1x PicoBlade 1.25mm Servo adapter (M2/S2 servos)
1x 20cm JST-GH-4P to JST-GH-4P cable
1x 20cm JST-GH-6P to JST-GH-6P cable
Dupont 2.54 pins (Board is shipped unsoldered)
Products related to this item
Loading related products...
❮
❯
Videos for similar product
Loading product videos...
❮
❯
Toys Hobbies & Robot Ranking
